Project Wood Working

This next project is going to be a Shaker inspired side table, very similar to the bedside tables I have already done, just different dimensions; also, this piece will be FOR SALE upon completion! I have not finalized a price yet so stay tuned. Anyways, this piece will be made out of cherry and curly maple. I am using some of the same cherry that I did for the Book Nook, procured from Peach State Lumber. The "plans" I am using call for 1 1/2" square legs (I put plans in quotes because I am not really going off of one specific plan, but a combination of a few). So, for the legs I am going to use 8/4 lumber to give me that finished dimension. Also, I select a board wide enough that I can get all 4 legs from the same width of wood for grain continuity. Below is a picture of how I did that.

As you can see in this photo, the grain all lines up so you know it all came from the same board. How I keep them all lined up prior to cutting is by numbering them and putting witness marks on the end of the board.

Once all the leg pieces are rough cut, I use my Lee Valley low angle smoother to smooth all side of the legs to final dimensions. This smoother leaves a surface that is glass smooth and ready for finish; I love this thing! Take a look at these full length shavings.

Ok, enough for now. My next order of business will be to mill up the parts that will make up the sides and back. Then I will work on the mortise and tenon joints to hold it all together. So, until then...

Be Safe!